bertomeu” beco F-Plus Concentrated
additive for the fuel treatment of
machinery and heating
THE CONTINUOUS USE
of the “rb
bertomeu” beco F-plus Concentrated additive with the dosage of 74 mililiters for 1,000 liters of fuel, keeps clean like new!! the tank and the injection system.
In all refuelings add first the additive and afterwards the fuel.
Ratio additive:fuel 1:13,500 1
liter of additive for 13,500 liters of fuel
FOR THE FUEL TANK CLEANING
For a 1,000-liters tank, use 700 mililiters of additive.
Recommendations to remove
waste accumulated at the bottom of a diesel tank:
1) Completely empty the tank. Temporarily store the diesel and the extracted residues in a container, so that the accumulated impurities are decanted.
2) For a 1,000-liter capacity tank, after being completely empty, add 0.07% of its total capacity equivalent to 700 milliliters (0.7 liter) of the "rb bertomeu" beco
F-Plus Concentrated additive.
3) Add approximately 50 liters of diesel
new / clean.
4) Recirculate the 50 liters of diesel together with
the 0.7 liters of "rb bertomeu" beco
F-Plus Concentrated additive and together with the waste, for approximately half an
hour with a pump approved for transferring
5) Completely remove the mixture of fuel and waste from the tank.
6) Dispose the extracted waste, through an authorized environmental waste manager.
FOR THE INJECTION SYSTEM CLEANING and with the tank already clean
For a 1,000-liters tank, use 500 mililiters of additive.
Recommendations for cleaning the injection system:
1) If you don't regularly use
the “rb bertomeu” beco F-Plus Concentrated additive, it is possible that
the injection system is dirty.
2) In order to clean the injection system,
we suggest 2 procedures with the intervention of the "rb bertomeu" beco
F-plus Concentrated additive.
a) Quick procedure: As long as the fuel tank does not have
an excessive accumulation of residues at the bottom, the dose
of the “rb
bertomeu” beco F-Plus Concentrated additive will be 500 milliliters
(0.5 liter) for 1,000 liters of fuel, the Injection system will
be quickly cleaned (one or two tanks).
b) Slow procedure: The continuous use of the “rb
bertomeu” beco F-Plus Concentrated additive, with
the recommended dose of 1 liter of additive for 13,500 liters
of fuel (74 milliliters for 1,000 liters), will perfectly
clean the injection system after several refills of
fuel and additive.
Combustion improvers and
microdroplets of water in suspension that the fuel contains.
fungicide, eliminates algae and fungi. (Bulletin 15)
fuel tank and circuit clean of rust and corrosion.
Injection system lubricant,
for Low Sulfur Diesel, ASTM D-6079 (HFRR) / ISO 12156 standards.
Corrosion inhibitor in
high and low temperature areas of the engine.
performance of the fuel injection system.
emission of soot and black smoke by 80%. (Bulletin 29)
life of the Diesel Particulate Filter (DFP).
valves and turbochargers (Technical Document RB-8)
costs and lengthens engine life. (Technical document RB-13)
You will save 400 liters during the consumption of
13,500 liters of fuel, with the use of only 1 liter of additive “rb
F-Plus Concentrated additive. Saves
3.10% of fuel on average .
If you have any technical or commercial question, please
fill-in and send this form.
bertomeu, SL. Since 1995, manufacturer of additives
for Heavy Fuel Oil, Diesel Oil and Crude Oil.