Technical brochure and Cost of treatment
Since 2001
"rb bertomeu” beco DC-Ship Concentrated
Since 2018 concentrated additive

 

Descarga de PDF

 

Complete treatment for Marine fuel oil RMA-10, RMB-30. For marine engines.

Vanadium and Sodium corrosion inhibitor and dispersant additive of MCR carbons and asphaltenes, demulsifier, detergent, removes algae and fungi, keeps the injectors clean, optimizes the combustion, reduces the fuel consumption and saves maintenance costs.

 

EFFECTS
Dispersant
of carbons and asphaltenes which reduces sludge by 55% and the trigger rate at the water treatment plants. It keeps the filters clean. Demulsifier, it decants the water and removes algae and fungi. Stabilizer that slows the fuel degradation. Detergent, it keeps clean injectors, improves combustion and reduces the emission of unburned particles by 80%. Soluble Magnesium which inhibits corrosion. Neutralizes the incrustations and corrosion caused by Vanadium and Sodium in valves and turbos.
The sum of all the effects provides a 3% fuel saving and, as a result, the CO2, NOx and SOx emissions are reduced at the same rate of 3% (mainly Carbon dioxide, CO2 and Nitrogen oxides NOx).

 

COMPOSITION
a) >60% of: Soluble Magnesium carboxylate / Magnesium Organic salts of Fatty acids (molecules-trade secret) soluble in hydrocarbons. [see point a-1]
b) >25% Dispersants, demulsifiers, detergents, stabilizers, surfactants, corrosion inhibitors, biocides. [see points b-1 to b-7]
c) <15% Organic solvents. [see point c-1]
d) Density: 0.900 Kg/L

a-1) Soluble Magnesium carboxylate / Magnesium Organic salts of Fatty acids (molecules-trade secret) soluble in hydrocarbons. Active area / Surface area of 1 gram of Magnesium molecules: ~ 1,800 m2/g
b-1) Dispersants, in order to evenly disperse the existing particles of asphaltene, coal and other solids that the fuel might contain, minimizing the formation of sludge.
b-2) Surfactants, that decrease the surface tension of the fuel and improve spraying.
b-3) Stabilizers, that delay the fuel’s aging and normal degradation and prevent sediment increase because of the increased size of small particles in suspension.
b-4) Detergents, that reduce the formation of carbonaceous deposits and flow reduction in nozzles and maintain an excellent spraying.
b-5) Corrosion inhibitors that protect metal parts of fuel circuits.
b-6) Desemulsifiers, which accelerate the speed of decanting of water to the storage tank bottom so that it can be easily removed.
b-7) Biocides that prevent the storage tanks contamination due to algae and fungi.
c-1) Organic solvents with flash point >65ΊC. (C.C.)

DOSAGE / ADDITION POINT : Add the additive through the inlet pipe to the storage tank.

Marine Fuel Oil RMA-30: 0.150 Kg/MT of fuel. - Additive:fuel ratio: 1:6666
Marine Fuel Oil RMA-10: 0.111 Kg/MT of fuel. - Additive:fuel ratio: 1:9000

COST OF TREATMENT ACCORIDING TO THE FUEL AND THE SUPPLIED QUANTITY OF ADDITIVE

Cost of treatment for fuel oil RMB-30 (Suggested dose 0.15 Kg/MT of fuel)
beco DC-Ship Concentrated additive. 1 Kg
23.94 €/Kg
19.68 €/Kg
10.33 €/Kg
9.81 €/Kg
Package
5 L
25 L
4 drums x 200 L
IBC x 1000 L
Cost of treatment for 1 MT of fuel
3.5910 €/MT
2.9520 €/MT
1.5495 €/MT
1.4715 €/MT

Cost of treatment for fuel oil RMA-10 (Suggested dose 0.111 Kg/MT of fuel)
beco DC-Ship Concentrated additive. 1 Kg
23.94 €/Kg
19.68 €/Kg
10.33 €/Kg
9.81 €/Kg
Package
5 L
25 L
4 drums x 200 L
IBC x 1000 L
Cost of treatment for 1 MT of fuel
2.6573 €/MT
2.1845 €/MT
1.1466 €/MT
1.0889 €/MT

Prices and conditions:

  • Tax base
  • Freight paid to destination in mainland Spain and the Balearic Islands
  • Export: Incoterms 2020 FCA Air and Sea FOB, from Barcelona
  • Export: Express shipment by air 1-2 weeks to any worldwide destination
  • Prices valid until September 30, 2020
  • NC–TARIC code: 3811 90 00

  • If you have any technical or commercial question, please fill-in and send this form.


    PRESENTATION

    1000-litrers HD-PE IBC, 220-liters metal drums, 25-liters and 5-liters HD-PE Jerrycans.


    ENVIRONMENT AND TRANSPORTATION

    Liquid product hazardous for the environment. Cataloged for transportation ADR/RID, ADN, IMDG and IATA: Class 9, P.G. III, UN 3082

    MANUFACTURER AND COUNTRY OF ORIGIN
    Manufactured by "rb bertomeu" in Spain (European Union)


    rb bertomeu, SL. Since 1995, manufacturer of additives for Heavy Fuel Oil, Gas Oil and Crude Oil.

    Version May 2020

    More information at www.rbbertomeu.com